Safety And Warning Guidelines; Laser Safety Warnings - Christie GS Series Service Manual

• Understand and follow all local safety codes and requirements when servicing energized (live)
equipment.
• Perform equipment service in a location free of obstructions and other hazards. For example,
you must have an unobstructed view of the area being serviced.
Wear personal protective equipment (PPE) clothing appropriate to the service you are performing.
This includes, but is not limited to, protective (electrically insulated) footwear, safety glasses, and
gloves rated for the working voltage of the equipment you are servicing.

Safety and warning guidelines

Read all safety and warning guidelines before installing or operating the projector.
This projector must be operated in an environment that meets the operating range specification.
Use only the attachments and/or accessories recommended by Christie. Use of others may result in
the risk of fire, shock, or personal injury.
Warning! If not avoided, the following could result in death or serious injury.
• Do not expose the product to moisture.
• Do not operate the product without all of its covers in place.
• This product must be installed within a restricted access location not accessible by the general
public.
• Only personnel who are trained on the precautions for the restricted access location can be
granted entry to the area.
• FIRE HAZARD! Keep hands, clothes, and all combustible material away from the concentrated
light beam of the projector.
• TRIP OR FIRE HAZARD! Position all cables where they cannot contact hot surfaces, be pulled, be
tripped over, or damaged by persons walking on or objects rolling over the cables.
• SHOCK HAZARD! Disconnect the product from AC before installing, moving, servicing, cleaning,
removing components, or opening any enclosure.
• A minimun of four people or appropriately rated lift equipment is required to safely lift, install, or
move the product.
• OPTICAL RADIATION HAZARD! Disconnect the power plug from the AC outlet if the product is not
being used for an extended period of time.
• Do not allow anything to rest on the power cord.
• Always provide proper ventilation for the product to prevent overheating.
Caution! If not avoided, the following could result in minor or moderate injury.
• Only Christie qualified technicians are permitted to open product enclosures.
• All procedures must be performed by Christie qualified technicians.
Notice. If not avoided, the following may result in equipment or property damage.
• Always use a lens plug when installing or moving the product. This prevents contaminants from
entering the product.
• Only use cleaning solutions recommended by Christie. All other cleaning solutions may cause
product damage and will void the warranty.

Laser safety warnings

This product is classified as CLASS 1 LASER PRODUCT - RISK GROUP 2 according to IEC 60825-
1:2014 and IEC 62471:2006. Complies with FDA regulations 21 CFR 1040.10 and 1040.11 as a Risk
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
Service guidelines
11