On-Screen Display Functionality Inspection; Check External Appearance - Christie GS Series Service Manual

c.Click Next.
d.Click I Agree.
e.Click Next.
f.Click Next.
g.Enter the name and click Next.
h.Click Install.
i.Select I want to manually reboot later.
j.Click Finish.
4.Perform wireless testing.
a.Select Christie Presenter.
b.Select Search.
c.Click OK.
d.Enter the password what you want to set.
e.Click OK.

On-screen display functionality inspection

ID Check item
1 General
2 Factory default
3 Display size
4 Display data channel
5 Acoustic

Check external appearance

ID Check item
1 Labels
2 Exterior surfaces and
covers
3 Logo
4 Screws
5 Safety or warning
labels
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
Check point
All on-screen display functions must be checked for functionality. When the on-
screen display menu is displayed, no visible peaking, ringing, streaking, or
smearing artifacts appear on the screen.
The factory settings (with appropriate centering, size, geometry distortion, and so
on) are displayed when Factory Reset is selected from the on-screen display menu.
All preset modes shall expand to full screen size using on-screen display Horizontal
and Vertical Size controls.
The purpose of the DDC test is to verify the DDC, DDC1/DDC2B operation of the
projector and to verify Plug & Play function.
High pitch sounds from cooling fans and color wheel are unacceptable.
Check point
Missing letters and blurry print are unacceptable.
Dirt, scrapes, and uneven color are unacceptable.
Missing logo, missing letters and blurry print are not acceptable.
All screws should be properly installed and the correct type.
All safety and warning labels must be visible.
Service setups
38