Introduction
This document provides technical information for assisting Christie qualified technicians in the servicing
of the Christie GS Series 1075 projectors.
Every effort has been made to make sure the information in this document is accurate and
complete. However, due to continuing research all information is subject to change without notice.
Christie assumes no responsibility for omissions or inaccuracies.
Affected products
The following products are affected:
•
Christie DHD1075-GS
•
Christie DWU1075-GS
Site requirements
To safely install and operate the projector, the installation location must have restricted access for
authorized personnel only and meet these minimum requirements.
Notice. If not avoided, the following may result in equipment or property damage.
• Replacement of optical light engine parts must be done in a clean room.
Projector components
Identify the main components of the projector.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
7