Christie GS Series Service Manual page 84

See the table below for descriptions of each connector.
Item Male connector on
connector board
A J8 Rear IR
B J5 MB TO KEYPAD CNNT
C J35 FAN10
D/E J33 FAN9/ J32 FAN8
F J23 PHOSPHOR WHEEL
G/I
J36 FAN7/ J37 FAN5
H J38 FAN6
J J24 P/W SENSOR CNNT
K J34 FAN4
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
Description
Composed of red, black, and white wires, a green
connector, and a black wire tube (three pin)
White connector (30 pin)
Composed of black, blue, and red wires, a white
connector, and a black wire tube (three pin)
Composed of black, green, gray, and red wires, a white
connector, and a black wire tube (four pin)
FPC cable (eight pin)
Composed of black, blue, gray, and brown wires, a
white connector, and a black wire tube (four pin)
Composed of black, green, gray, and red wires, a white
connector, and a black wire tube (four pin)
Composed of white, black, and red wires, a red
connector, and a black wire tube (three pin)
Composed of black, blue, gray, and red wires, a white
connector, and a black wire tube (four pin)
Printed circuit boards and sensors
Figure
84