Christie GS Series Service Manual page 71

See Removing the top cover
2. Remove the 15 M3 screws with a Phillips #1 screwdriver securing the top shielding.
3. Unplug the fan connector to the main board.
4. Remove the eight M3 screws with a Phillips #1 screwdriver securing the shielding.
5. Loosen the four captive M3 screws with a Phillips #1 screwdriver securing the fan modules (fan
7 and fan 5).
emove the fan(s).
6. R
7. Replace the affected fan.
8. To re-install the fan modules, follow these steps in reverse order.
GS Series 1075 Service Manual
020-001236-02 Rev. 1 (12-2019)
on page 63.
Fan 5 Fan 7
Ventilation and cooling
71