Amtech Axpert-Eazy Series Instruction Manual page 90

M713: Over Current Status IU 1-2-3
This parameter displays the over current fault from individual phase (current sensor) from inverter unit
(IU) 1, 2 or 3.
This parameter is applicable only when PCA-2049A parallel interface board is used in the drive. This
value shows last fault condition and will be update with latest fault. This status clears by value "555" in
B311.
M o d e - M
M 7 1 3
IU-1 U-Phase
IU-1 V-Phase
IU-1 W-Phase
M714: Over Current Status IU 4-5-6
This parameter displays the over current fault from individual phase (current sensor) from inverter unit
(IU) 4, 5 or 6.
This parameter is applicable only when PCA-2049A parallel interface board is used in the drive. This
value shows last fault condition and will be update with latest fault. This status clears by value "555" in
6
B311.
M o d e - M
M 7 1 4
IU-4 U-Phase
IU-4 V-Phase
IU-4 W-Phase
M715: Over Temperature Status IU 1~6 DU 1~2
This parameter displays the over temperature fault from thermostat from inverter unit (IU) 1 to 6 and
diode unit (DU) 1 and 2. This parameter is applicable only when PCA-2049A parallel interface board
is used in the drive. This value shows last fault condition and will be update with latest fault.
M o d e - M
M 7 1 5
GROUP-8
Default Differ Parameter (Change Parameter List)
This group provides the change parameters list, only the parameters which differ from default value
and user also can change parameters value from this group. Use UP or DOWN key for next changed
parameters.
Amtech
6-44
O C S t s
0 0 1 0 0 0
IU-2
O C S t s
0 0 1 0 0 0
IU-5
O T I U 1 - 6
0 0 0 0 0 0
IU-1 IU-2 IU-3 IU-4 IU-5 IU-6
G r o u p - 7
I U 1 - 2 - 3
0 0 0
IU-3
G r o u p - 7
I U 4 - 5 - 6
0 0 0
IU-6
G r o u p - 7
D 1 - 2
0 0
DU-1
DU-2