Amtech Axpert-Eazy Series Instruction Manual page 172

Tc = Time constant. (0 to 100)
Result will be stored in Rn.
58. LPF2 (OPCODE
59. LPF3 (OPCODE
60. LPF4 (OPCODE
Same as LPF1.
61. JMPC (OPCODE
This command is used for conditional Branch application.
Example,
JMPC Xn Fn
Where,
Xn = Command Number (0 to 100)
Fn = Flag Number (0 to 99)
If Fn (flag no) in equal to 1, then It will JUMP to selected Xn Command number and start
executing from there.
62. JMPNC (OPCODE
This command is used for conditional Branch application.
Example,
JMPC Xn Fn
6
Where,
Xn = Command Number (0 to 100)
Fn = Flag Number (0 to 99)
If Fn (flag no) in not equal to 1, then It will JUMP to selected Xn Command number and start
executing from there.
Amtech
6-126
064)
065)
066)
067)
068)