Interface Topo Xml; Example For Displaying The Wiring Using An Xml Image - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Topo

6.9 Interface Topo XML

Note
No more than 6 Motor Module (MM) may be connected to a Slave.
Deployment methods
You can select between the following deployment methods:
6.9 Interface Topo XML
6.9.1

Example for displaying the wiring using an XML image

<?xml version="1.0" encoding="UTF-8"?>
<dp version="4.8.0.0">
<bus subsystem="3">
dovar="doCU" name="NCU" compnr="1">
dovar="doLM" name="ALM" compnr="2">
510
The extended user-specified topology is transferred directly to the control.
The user can optionally select or deselect the PLC and NC data.
The extended user-specified topology is deployed as a Windows "*.exe" or Linux
"*.usz" package, as already known from Expert.
The user can optionally select or deselect the PLC and NC data.
<slave address="3">
<control_unit_ncu doname="NCU_XY" donr="1" dotype="3"
<cliq index="0">
<line_module doname="ALM_XY" donr="2" dotype="3003"
<cliq index="0" uplink="true"/>
<cliq index="1"/>
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE