Siemens SINUMERIK 840D sl Operating Manual page 246

Create MyConfig - Expert
4.4 Project folder
Configuration
Export to file...
Import from file...
Manage list...
The individual submenus are described in detail below.
Configuration - Store in list
The "Store in list" submenu is selected via the "Configuration" main menu.
Figure 4-56
You can store configurations in lists for Project, Dialogs and Steps. If a configuration is stored
in the project or in the "Dialogs" tab > "Package configuration", you can select the areas for
the system variables to be processed in the "Configuration selection" dialog.
For storage of the configuration at "Dialogs" tab > "Step tree", only "steps" are offered as
preassignment, because the configurations of the package or the dialogs can no longer be
changed at this execution time.
246
You can export active configurations to a file via this selection.
Opens the "Configuration selection" dialog.
Select the configuration areas that you want to export:
● Package
● Dialogs
● Steps
Clicking the "OK" button opens the "Export configuration" window.
Navigate to the required path or folder. Save the exported configuration file with
the "*.upcfg" file extension.
Opens the "Import configuration" window. Navigate to the desired configuration
and select the configuration file "*.upcfg".
Confirm by clicking the "Open" button to open the "Configuration selection" dialog.
Select the desired areas for the system variables to be processed.
Note
The current project settings are overwritten by the selected areas.
Package tab...
Dialogs tab > Package configura‐
tion...
Dialogs tab > Step tree...
"Configuration" main menu > "Store in list" > (<selection>)
Permits the management of configuration lists.
You can copy, rename, link, remove, edit, etc.
the configurations.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE