Siemens SINUMERIK 840D sl Operating Manual page 230

Create MyConfig - Expert
4.4 Project folder
Step configuration
The following settings are available for the property group "Step configuration":
Management in the
Activation
Execute
Activation disabled
Collapse
Additional information
Information on the system variables can be found under the System variables reference list in
the Steps tab (Page 384) section.
Miscellaneous
The following settings are available for the property group "Miscellaneous":
Information text
Warning message
230
Main project
Subproject
Yes
No
Yes
No
Yes
No
Yes
No
An information text can be entered for each step; this text is then displayed on the "Step
tree" dialog if the particular step is selected or being processed.
Optionally, a warning message can be configured which informs the operator that the
step is activated or deactivated when clicking the "Finished" button on the "Step tree"
dialog page.
Specifies where the step configuration is to be managed.
The "Activation" defines whether a step is to be executed.
For "Yes" this step is executed if all of the higher-level steps are also
activated.
In this case, the activation state has a green background, and the
property "Execute" indicates "Yes".
With "No" this step and all of its substeps are not executed.
If "Execute > Yes" is displayed, the step is executed during the pack‐
age execution.
An activated step, which is displayed in green in the step tree, contains
the property "Execute > Yes".
If "Execute > No" is displayed, a step is either not activated or the
green line was interrupted due to the lack of activation in a higher-level
step.
This step is not considered during package execution.
If the "Activation is locked", then when executing the package, the
operator can no longer activate or deactivate the step.
The context menu allows the selected step to be locked, including all
of the substeps.
When executing the package, steps that only contain locked substeps
are collapsed.
For the time of package execution, it can be defined for each step
whether the step will be collapsed.
Substeps can be hidden in this way.
The overview for display of the step tree can therefore be configured
individually.
In the default setting "No", substeps during package execution are
displayed.
The setting "Yes" hides the substeps.
In the configuration view, collapsed steps are displayed in italics.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE