Siemens SINUMERIK 840D sl Operating Manual page 4

Preface
● Topo is a piece of topology software that supports you in displaying and/or creating a
comparison and/or target topology for the automated commissioning of the SINAMICS drive
system.
With Topo, the axis-drive assignment can also be displayed or configured.
● Shield is the execution software, which is not individually installed. When forwarding the
project via Expert, an executable package containing the software component Shield,
scripts, instructions and data is created. After launching the package, it is processed by
Shield according to the configuration.
Training
For information about the range of training courses, refer to:
● SITRAIN (www.siemens.com/sitrain) - training courses from Siemens for automation
products, systems and solutions
FAQs
You can find Numerical control on the Service&Support pages under Product Support
support.industry.siemens.com/cs/de/en/ps/faq).
SINUMERIK
You can find information on SINUMERIK under the following link:
sinumerik)
Technical Support
Country-specific telephone numbers for technical support can be found on the internet under
Contact (https://support.industry.siemens.com/cs/de/en/ps/faq).
4
(http://www.siemens.com/
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
(https://