Siemens SINUMERIK 840D sl Operating Manual page 191
Integrate create myconfig - diff, expert, topo
Hide thumbs
Also See for SINUMERIK 840D sl:
- Function manual (2184 pages) ,
- Programming manual (1334 pages) ,
- Commissioning manual (1102 pages)
Table of Contents
Advertisement
HW configuration (SDB)
The following settings are available for the "HW configuration (SDB)" and are activated when
the package is executed:
Origin of data
Note
This selection can be blocked by the project engineer in order to prevent changes by the operator
during the package execution.
Initial state
Offline archive
Do not use
Setting disabled
Yes
No
Preselection of the offline archive
DRV archive data / drive configuration
In the "DRV archive data / drive configuration" property group, you can define via the "Origin
of data" property whether drive commissioning will be performed in the production step by
"Automatic configuration" or "User-specified topology".
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
If in the package configuration, "Package" > "Data areas" > "Use NCU/PPU"
has been activated in the tab, the archive data can be loaded directly from the
control with the "initial state" setting.
If the initial state is used, the archive is extracted that was located on the control
when this dialog was entered.
If the CNC software was installed beforehand, only default data is available in
the archive.
Note
No data is reset when upgrading the CNC software. The archive that is available
in the system after data migration is used.
If this option is used, the output data for the area is taken from a stored SINU‐
MERIK archive.
If this option is used, no output data for this area is made available by the dialog
page.
More information is provided in the notes in the Archive data transfer (package
execution) (Page 218) section.
The selection at "Origin of data" can be blocked by the project engineer via this
option in order to prevent changes by the operator during the package execu‐
tion.
At "Preselection of offline archive", an SDB archive with system data blocks can
be inserted, linked or preselected from a list. The package specified here is
preselected during the package execution.
An SDB archive can also be saved in addition to the package when the package
is being executed.
Alternatively, enter the path of a file which is located next to the package "/
<Path>/<File>",
e.g. "./sdb.arc".
Create MyConfig - Expert
4.4 Project folder
191
Advertisement
Table of Contents
