Figure 6-15
Figure 6-16
The following options are available:
● "Retain existing component properties"
The existing component properties are retained or can be adapted directly in the dialog.
● "Properties from preconfigured component"
The component properties from the preconfigured component of the DO are used.
If this option is selected and confirmed with "Yes", the component is added as
"preconfigured component" to the component list.
If this option is selected, but rejected with "No" in the following dialog, the component is
removed.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
DO list - preconfigured components
Preconfigured properties for a component
Create MyConfig - Topo
6.4 Topo - operation
481