Siemens SINUMERIK 840D sl Operating Manual page 65

Figure 3-11
Main menus
The following main menus are available for the Script Editor.
Table 3-10 File main menu
File
New
Open
Close
Save
Save as...
Exit
Table 3-11 Extras main menu
Extras
Options...
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Selection of the parser type
<Ctrl+N> Creates a new script file with the "*.upscr" file extension.
<Ctrl+O> Opens an existing script file with the "*.upscr" or "*.uplib" file extension.
Closes the current script file.
<Ctrl+S> Saves the current script file.
Saves a script file as the desired "*.upscr" or "*.uplib" file type.
<Alt+F4> Exits the Script Editor.
Opens the "Options" dialog > "Language" tab.
You can switch between the German and English user interface languages here.
The language change only takes effect at the next call of the Script Editor.
Create MyConfig - Diff
3.3 SINUMERIK archive comparison
65