Example Of A Dialog Page: Package Configuration - Siemens SINUMERIK 840D sl Operating Manual

Figure 4-143 Select package - package selection
Package configuration for deployment
In this subinstance, all system variables for the package, the dialogs and the steps are listed,
which are configured in Expert for this package, or were entered via a configuration file for
automated package deployment.
Most system variables can be subsequently modified using a configuration file *.upcfg via the
dialog page Package configuration or a script.
Further information on the system variables can be found in the Reference list system
variables (Page 368) section.
4.12.4.4

Example of a dialog page: Package configuration

This dialog page is optional; this means that a display is only made in the logbook if it was
configured in Expert.
See also: Dependency of the dialog pages on data areas (Page 144)
Display Dialog page main instance: Package configuration
This shows as example how a change to the configuration file is shown.
In Expert, in the "Package configuration dialog - System variables" the property "preselection"
was not configured, and therefore system variable Up.
$Dialog.PackageConfig.CfgFile = " " was allocated an empty string by Expert.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Expert
4.12 Package execution
415