Create MyConfig - Expert
4.4 Project folder
4.4.2.16
NCU/PPU initial state (configuration)
This dialog allows a data backup of the initial state of the NCU/PPU prior to the package
execution.
All current control data, including the CF card, or only the current active online data of the NC,
PLC and DRV subsystems can be saved as SINUMERIK archive.
You can configure the following property groups for the "NCU/PPU initial state" dialog page:
● Dialog
● Data backup CF card
● Archive
● Dialog scripts
Figure 4-21
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialogs" tab.
172
NCU/PPU initial state - project engineer view
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE