Siemens SINUMERIK 840D sl Operating Manual page 483

Two topologies in the current project that have been selected can be compared via the menu
"Compare > Refresh"
It is also possible to compare a topology in the project with one from an archive or from a .ust
or .utz file via the menu "Comparison > Compare with External Topology".
Figure 6-18 Comparing topologies
Marking the differences in the component properties
The Properties table displays differences in the properties of the components and at the same
time offers the option of editing the properties. In addition, it is also possible to synchronize
individual properties of the component or also complete components between two topologies
via the context menu. Differences in the properties of the two components that have been
selected are shown in color.
For the article number, differences at the individual positions are also shown in color.
The colors have the following meanings:
Red
Blue
Green
Gray
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
.
Property is available in both components, but is different
Property is only available in the component selected in the right-hand topology
Property is only available in the component selected in the left-hand topology
Digit of the article number irrelevant (x)
Create MyConfig - Topo
6.4 Topo - operation
483