Siemens SINUMERIK 840D sl Operating Manual page 234

Create MyConfig - Expert
4.4 Project folder
Up
Down
Adapt Link
Edit link...
Search for components and relink...
Insert a new step
To create a new step, click an existing step and select "New step" via the context menu.
Figure 4-52
Component link
The yellow
linked components.
Double-clicking a component link opens the component in the Component Editor. Open
components are shown in bold in the step tree.
Clicking a component that is already open, brings the associated Component Editor into the
foreground.
234
Alt+Up
Alt+Down
Create new step
icon displays internal-linked components; the blue
Shifts the component within the step upwards in the
execution sequence.
Shifts the component within the step downwards in the
execution sequence.
Adapts the link entry in the component list of the step
for an external component. A new target for the link can
be selected in the dialog that opens.
In a dialog, the link path can be manually changed.
Opens the Component explorer with which the selected
component can be replaced by another existing com‐
ponent.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
icon displays external-