Notes On The Step Tree (Configuration) - Siemens SINUMERIK 840D sl Operating Manual

Figure 4-38
Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.32

Notes on the step tree (configuration)

This dialog sends notes on the "step tree" to the operator.
You can configure the following property group for the "Notes on the step tree" dialog page:
● Dialog
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Version display - commissioning engineer / operator view
Create MyConfig - Expert
4.4 Project folder
211