Buttons for the package execution dialogs
Information on the general buttons in the dialogs can be found at Meaning of buttons
(Page 155).
4.4.2.39
End (configuration)
This dialog page completes the package execution and saves the logbook.
You can configure the following property groups for the "Finish" dialog page:
● Dialog
● Logbook
Figure 4-47
By selecting the "data areas" in the "Package" tab, the usable dialog pages are defined in the
"Dialog" tab.
You can find an overview for this in the Dependencies of the dialog pages of data areas
(Page 144) section.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Dialog page: Finish - project engineer view
Create MyConfig - Expert
4.4 Project folder
223