Step Tree (Package Execution) - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.4 Project folder
The following settings are available for "Archive":
Create before step tree
Create after step tree
Dialog scripts
In the "Dialog scripts" property, "Scripts" entry, click the
dialog.
You can edit scripts here that are to be executed at selectable times during package execution.
You can find detailed information on the dialog scripts in the section with the same name
"Dialog scripts (Page 145)".
You can find an example of the dialog scripts (Page 149) for the step tree in "Examples of
scripts in dialog pages".
4.4.2.35

Step tree (package execution)

This dialog permits the configuring of the package steps in a hierarchical tree structure.
Dialog view during package execution (for commissioning engineers / operators)
On the dialog page, the operator can activate or deactivate interactive steps. The information
for the selected step is displayed at the bottom in the yellow field and makes it easier for the
operator to understand.
Further information can be found on package execution in the Package execution (Page 405)
section.
216
Yes Here, you specify whether an archive with the NC, PLC and DRV areas is to
be created before the execution of the step tree.
No
The backup is performed for the NC area with the setting that all data is to be
saved.
For setting "Yes", the archive is saved with the name 'StepBegin_<Da‐
tum>.arc'.
The archive is stored in the folder based on the name of the CF card ID which
is located next to the package after the package execution.
If no NCU is involved with the package execution, the archive is stored in the
'CF-NoneNCU' folder.
Yes Here, you specify whether an archive with the NC, PLC and DRV areas is
created after execution of the step tree.
No
The backup is performed for the NC area with the setting that all data is to be
saved.
For setting "Yes", the archive is saved with the name 'StepEnd_<Datum>.arc'.
The archive is stored in the folder based on the name of the CF card ID which
is located next to the package after the package execution.
If no NCU is involved with the package execution, the archive is stored in the
'CF-NoneNCU' folder.
button to call the "Dialog scripts"
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE