Generating Do Variables Automatically - Siemens SINUMERIK 840D sl Operating Manual

6.4.4.2

Generating DO variables automatically

If a new DO-forming component is added to a topology, a DO variable can be generated.
①
No DO is created for this selection.
②
A DO is generated. DO variable, DO number and DO name can be edited. The DO type is determined automatically.
③
An existing DO is selected from the list.
④
If the "Always use selected option" option is activated, this dialog is not redisplayed when components are added.
The selected option is always used without a new prompt.
Exception:
This action is hidden for option
⑤
The option "Use selected option for all DO-forming components of module 'DMM_01'" is displayed only for multiple
components in a module (DMM, combi, HLA, etc.).
If this option is activated, the selected option is also repeated for the other components of the module.
Exception:
This action is hidden for option
Figure 6-10 Generating DO variables automatically
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
③
"Select existing DO".
③
"Select existing DO".
Create MyConfig - Topo
6.4 Topo - operation
475