Package Selection - Siemens SINUMERIK 840D sl Operating Manual

Create MyConfig - Expert
4.12 Package execution
Explanation of the buttons
The following buttons are available in the logbook:
Table 4-59
Buttons
Expand
Collapse
Details on/
Details off
Next W/E
Prev W/E
4.12.4.3

Package selection

The package selection is not a dialog page that can be configured. This instance is always
displayed in the logbook.
The package only automatically displays the Package selection dialog if there is more than
one package available for execution - or no package was uniquely started by a (batch)
command or double-click. This dialog prompts users to enter the package that should be used.
The main Package selection instance contains the following information:
● Time of day that this package was started.
● Package:
Name of the package that was started.
● UserVersion:
If a user version was entered, then it is displayed here.
● Computer:
Name of the computer on which the package execution was started.
● User:
The name of the user that logged onto the computer and started package execution.
● Windows:
The Windows version of the computer on which the package was executed.
414
Logbook buttons
Meaning
Using this button, all of the dialogs are opened, and all operations associated with
executing the package are shown.
All of the open dialogs are closed again using the Collapse button.
Details on indicate details, which are shown in a gray font.
Only using Details on are all system variables and information "ignored" and
"checked" displayed.
These details are hidden using Details off .
With the Next W/E button you can jump across all dialog pages from one warning/
error to the next warning or error.
With the Prev W/E button you can jump across all dialog pages from the displayed
warning/error to the previous warning or error.
Open an individual element, e.g. dialog, step, task.
Close an individual element.
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE