The Advantages Of Using Comparison Or User-Specified Topology - Siemens SINUMERIK 840D sl Operating Manual

Figure 6-27 Assigning DO variables to SINAMICS components
Note
We recommend that the drive data is assigned to the drive objects via the assignment of DO
variables. Although a direct assignment via a path specification is possible in short form, this
limits the flexibility and can easily result in errors.
Assignment options
There are two ways of assigning the DO variables to the SINAMICS components:
1. When processing the package, you need to manually assign the DO variables to the
SINAMICS components on the "SINAMICS topology" dialog page.
2. The DO variables are assigned to the SINAMICS components as a property during the
configuration of a comparison topology or user-specified topology.
The two topologies are linked into the project on the "SINAMICS topology" dialog page.
Which topology is used during the runtime depends on the configuration of the DRV area
on the "System configuration" dialog page.
6.7.6

The advantages of using comparison or user-specified topology

The configuration of a comparison or user-specified topology withTopo and the use of the file
in the package, offer a number of additional advantages:
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE
Create MyConfig - Topo
6.7 SINAMICS device configuration
doY doY
503