Siemens SINUMERIK 840D sl Operating Manual page 38

Create MyConfig - Diff
3.3 SINUMERIK archive comparison
In the "Selective" comparison mode, the data structures of all comparison objects (archives,
files) are placed one below the other - the structure is separately established for every
comparison object.
Contrary to the "Normal" comparison mode, in the "Selective" comparison mode, all data end
nodes of the same type can be compared with one another as required.
The data, which should be compared with one another, is selected by activating the end nodes.
⑥
Extend selection / Reduce selection buttons
Extend selection / Extend All: Either a selected folder or the complete data view with all
subfolders and nodes in the tree structure can be displayed.
Reduce selection / Reduce All: Either a selected folder or the complete data view can be
reduced to the main folder. All subfolders and nodes are then no longer visible.
⑥
Display result: Different / Equal / Not available in all comparison objects
These values provide information as to how many identifiers in the comparison results have
unequal (red) or equal (black) values or which values do not exist in all comparison objects
(blue/green arrows).
⑦
Expert list and filterconfigurations
If the functions "Expert list" and "Filter" are active in the comparison configuration, the relevant
icons will be displayed.
Double-clicking the icons opens the expert list or filter in the comparison configuration.
Note
Using "Expert list" and "Filter," non-relevant identifiers can be excluded from the comparison,
so that these are no longer displayed.
⑧
Display of the comparison configuration
The comparison configuration that is being used in the actual comparison is displayed in this
field.
The comparison configuration is opened with a double-click.
⑩
Display short description for the marked parameters
A brief description of the selected parameters is displayed in the text area with yellow
background.
⑪
Result from the Normal tab / Selective tab
The data of the nodes selected in areas
of the user interface.
The identifiers are listed in the column to the far left, and in all of the additional columns, the
associated values of the individual comparison objects (archives, nodes).
38
④ ⑤
and is prepared in a tabular form in this area
SINUMERIK Integrate Create MyConfig - Diff, Expert, Topo
Operating Manual, 12/2017, A5E36537479B-AE