Overview; Introduction; Equipment Description - Ingeteam Ingecon mWind Interface Installation Manual

Installation manual

1. Overview

1.1. Introduction

This manual aims to describe the Ingecon
tion, installation, commissioning, maintenance and operation.

1.2. Equipment description

The Ingecon μWind Interface has been designed to work together with the Ingecon
®
and conversion of the energy generated by the wind turbine.
This equipment offers the following functions:
• Perform the AC-DC conversion, by adapting the AC voltage generated by the wind turbine to the Ingecon
µWind DC voltage input.
• Protect the system against an excessive rotational speed and over voltages and also to limit the power intake
when the wind turbine is operating in conditions with strong winds.
• Stop the wind turbine.
• Remote control of the installation and to monitor additional wind farm variables.
In addition to the capability of performing the AC-DC conversion, the Ingecon
bility of connecting wind turbines with a DC output voltage. In this case, the protection, monitoring and remote control
functionalities can still be used.
wind turbine
* resistors are not included with the equipment.
AAY2000IKI06
μWind Interface (IWI) and provide adequate guidelines for correct recep-
®
resistors*
Ingecon μWind Interface
®
communications
Ingeteam Power Technology, S.A.
µWind inverters in the control
®
μWind Interfaces also offer the possi-
®
Ingecon μWind
®
®
grid
9