Operating, Storage And Transport Conditions; Safety Notice; Equipment Reception - Ingeteam Ingecon Sun Smart U Installation And Operation Manual

Installation and Operation Manual
INGECON®SUN SMART U
AAS2000IKI05
3

Operating, Storage and Transport Conditions

3.1 Safety notice

3.2 Equipment reception

AAS2000IKI05
Rev. _
Date: February 2011
Failure to comply with the instructions provided in this section could cause
damage to the equipment.
Ingeteam Energy S.A. assumes no liability whatsoever for any damage
derived from non-compliance with these instructions.
WARNING: Equipment is heavy.
Packed equipment weights approximately 255 kgrs or 325 kgrs. 15 kW or
25 kW models. Read carefully this instructions until moving the pack.
On reception, please check the terms indicated in the Delivery Note, sign the
box: FIRMA RECEPTOR MERCANCIA, to indicate that you have received
the merchandise, and return the signed copy to the sender's address.
CAUTION.
Do not storage in environments up to 55ºC or less than -20ºC of
temperature. Avoid humidity.
Palets with following characteristics will be received:
MODEL PALET TYPE
Wooden:
15U 208
Bubble wrap
15U 480
25U 208
25U 480
Identifying the equipment
The serial number clearly identifies the inverter. All communications with
Ingeteam Energy S.A. should indicate this number:
WEIGHT HEIGHT/WIDTH/LENGTH
(pounds)
771 55 / 35 / 25
771 55 / 35 / 25
771 55 / 35 / 25
771 55 / 35 / 25
(in)
Serial Number
Page 29