Installing A Disk Drive - Silicon Graphics Origin 300 User Manual

3: System Operation

Installing a Disk Drive

66
To install a disk drive, follow these steps:
1. Open the bezel door as shown in Figure 3-11a.
2. Position the drive assembly so that it engages the bay guide rails and gently push
the drive into the bay (refer to Figure 3-11b).
3. Swing the locking handle towards the chassis until the locking handle engages the
latch (refer to Figure 3-11c).
4. Close the bezel door as shown in Figure 3-11d.
007-4498-002