Silicon Graphics Origin 300 User Manual page 243

007-4498-002
In this command set, the mnemonic sel may replace the word select.
Use the select command to view the brick ID number and subchannel that receives
console input. Example C-57 shows sample output from the select command. In this
example, the brick ID is an Origin 300 base module in rack 1, slot 20 (001c20) and the
subchannel is the console channel.
Example C-57 select
L2> select
known system consoles (non-partitioned)
001c20 - L2 detected
current system console
console input: 001c20 console
console output: not filtered
Use the select <rack> <slot> command to set the brick ID number that receives
console input. Example C-58 shows sample output from the select <rack> <slot>
command. In this command, the variable <rack> is a rack number, and the variable <slot>
is a slot number. In the example, the brick ID is an Origin 300 base module in rack 1, slot
32 (001c32).
Example C-58
select
L2> select 1 32
INFO: default system console override, changed to: 001c32 console
console input: 001c32 console (CAUTION: default overrode!)
console output: not filtered
Use the select subchannel <subchannel> command to set the subchannel for the
module that receives console input. Example C-59 shows sample output from the
select <subchannel> command. In this command, the variable <subchannel> is the
subchannel number (a, b, c, d or console).
Example C-59
select subchannel
L2> select subchannel c
INFO: system console changed to:001c30 CPU2
console input: 001c30 CPUc (CAUTION: default overrode!)
console output: not filtered
Command Output
<rack> <slot>
Command Output
<subchannel>
L2 Controller Command Set
Command Output
217