Silicon Graphics Origin 300 User Manual page 97

!
007-4498-002
Caution: Electronic equipment can be irreparably damaged by electrostatic discharge
(ESD). Always follow these preventive measures when you handle a system component:
- Remove a component from its antistatic bag only when you are ready to install it.
- If you handle a component before installation, do not place it on surfaces that produce
ESD (carpeting, for example) or near devices that create static electricity.
- Attach a static wrist strap to a grounded connection on your system when you install
or remove a component.
Tools/Parts Required:
One or more of the following DIMMs:
• DIMM 256-MB P/N 030-1018-00x
• DIMM 512-MB P/N 030-1044-00x
• DIMM 1-GB P/N 030-1060-00x
• T20 ballpoint Torx driver P/N 7260422
Memory
71