Quit; Rackid; Reboot_L2; Select - Silicon Graphics Origin 300 User Manual

C: System Controller Commands

quit

rackid

reboot_l2

select

216
Use the quit command to exit the L2 command processor.
The rackid set of commands enables you to display and set the rack identification
number for the L2 controller. In Example C-56, the rack ID number of the L2 controller is
3.
•
rackid
• rackid <decimal exp>
Example C-56 rackid Command Output
L2>rackid
rack ID is 3
The reboot_l2 command reboots the L2 controller using the newest firmware image.
The reboot_l2 force command reboots the L2 controller even if the firmware image
is invalid.
•
reboot_l2
•
reboot_l2 force
The select set of commands displays the brick ID number and subchannel that receives
console input or sets the brick ID number and subchannel that will receive console input.
•
select
• select <rack> <slot>
• select subchannel <subchannel>
• select filter and select syscon <value>
007-4498-002