System Operation - Silicon Graphics Origin 300 User Manual

3.
007-4498-002
Chapter 3

System Operation

This chapter describes how to operate your SGI Origin 300 system with NUMAlink
module. Specifically, it explains how to perform the following procedures:
• "Connecting a System Console to Your System" on page 54
• "Connecting a Myrinet-2000 Switch to Your System (Clustered Systems Only)" on
page 56
• "Installing or Removing PCI Cards, Disk Drives, and Memory" on page 58
• "Removing a Base Module from a Rack" on page 76
• "Installing a Base Module in a Rack" on page 78
• "Powering Your System On and Off" on page 80
• "Monitoring Your System" on page 91
53