Transfer Program To The Easye4 Device; Transfer With A Microsd Memory Card - Eaton easyE4 Manual

4.6 Transfer program to the easyE4 device

4.6.1 Transfer with a microSD memory card

There are two options for directly transferring a finished .e70 program to an easyE4
device.
With a microSD memory card
l
With a direct Ethernet connection between the PC and easyE4
l
Prerequisites
You will temporarily need a suitable microSD memory card with a maximum stor-
l
age capacity of 32 GB.
A PC on which the easySoft 7 programming software is installed, → Section
l
"Installation instructions", page 83
Insert the microSD memory card into a drive on your PC (with a suitable adapter if
necessary).
Open the easySoft 7 programming software on your PC.
Create an application program and save it.
Use the help in the
key or open the easyE4 manual.
Or
Open a sample program.→ Section "Sample Projects", page 711
Make sure to stay in the Project view, as the Project menu will only be avail-
able there.
Application examples
Support has provided a number of applications that are available for download
as ZIP files from the Software Download Center.
Download Center - Software
http://www.eaton.eu/software/Anwendungsbeispiele/easy/Deutsch
http://www.eaton.eu/software/Application Samples/easy/English
These examples come with a task description, the circuit diagram, and the
easySoft 7 project (in the EDP and LD programming languages as of this writ-
ing).
easyE4 10/19 MN050009 EN www.eaton.com
4.6 Transfer program to the easyE4 device
menu by accessing the help topics with the F1
4. Operation
153