Eaton easyE4 Manual page 442

6. Function blocks
6.1 Manufacturer function blocks
438
Function block outputs
Description
(Bit)
Q1 1: If the transmit job has been completed.
Assigning operands
You can assign the following operands to the function block outputs that are numeric
outputs:
Assigning operands
MB, MD, MW - Markers
NB, NW, ND - NET markers
NET stations n
QA - Analog output
I - Value input of a FB
2) Only on projects with ≥ 2 base devices on NET
You can assign the following operands to the function block outputs that are bit outputs:
Assigning operands
M - Markers
SN - Output bit via NET (send)
bit via NET (send)
2)
N - Network marker bit
LE - Output backlight
Q - Bit output
I - Bit input of a FB
2) Only on projects with ≥ 2 base devices on NET
Parameter set
Function block release by
EN is necessary
Parameter display
+ Call enabled
Simulation not possible
Other
Retention
easyE4 10/19 MN050009 EN www.eaton.com
Value outputs
x
2)
x
x
x
Bit outputs
x
2)
SN - Output x
x
x
x
x
Description
If this checkbox is enabled, the state
of function block input EN will be
evaluated. If the checkbox is dis-
abled instead, the function block will
be enabled and function block input
EN will not do anything.
Constants can be edited on the
device, as can function block para-
meters when using the EDP pro-
gramming language.
Note
Note
This parameter ensures that
when existing programs are
copied, the functionality of the
function blocks that are carried
over will be retained. The para-
meter will be automatically set
to 0 or 1 depending on the func-
tion block.