Eaton easyE4 Manual page 443

The function block does not recognize retentive data.
User example
The trigger pulse is set at 03:32:21 (hh:mm:ss). The other stations are synchronized at
03:33:00. The time is accepted by all stations.
See also
→ Section "GT - Get values from NET", page 428
→ Section "PT - Put values to NET", page 432
→ Section "Setting up a NET", page 625
easyE4 10/19 MN050009 EN www.eaton.com
6. Function blocks
6.1 Manufacturer function blocks
439