Display Color Backlight; Keyboard - Eaton easyE4 Manual

4. Operation
4.1 Base device with display and buttons

4.1.1.1 Display color backlight

4.1.2 Keyboard

128
The display backlight can be illuminated white, red, or green or be switched off in order
to signal specific device states.
The backlight brightness has three different available levels.
Press the OK button on the device in order to open the main menu from the status
display.
Either the cursor position or the available action on the display will flash. A checkmark
✓ will be shown to indicate which option is currently selected. Please note that since
the display has six lines only, you may need to use the
the remaining available lines on a screen.
The display's settings can be configured on the easyE4 device in the SYSTEM
OPTIONS\SYSTEM\DISPLAY menu, → Section "Display", page 563
DEL
Deleting in the circuit diagram
ALT Special functions in circuit diagram, Status display
Cursor Move cursor
buttons Select menu items,
Change numbers, contacts and values
ESC Back, Cancel
OK Next menu level, Save your entry
Once the device is switched on, as well as during ongoing operation, the device will
switch to sleep mode and display the status display after a configurable time without
any operator activity.
Press the OK button on the device in order to open the main menu from the status
display.
Use the cursor buttons to scroll through the individual menu options.
To confirm a selection, press OK. to open the corresponding menu path.
If necessary, use the
right and left display areas.
If this option is available, the
easyE4 10/19 MN050009 EN www.eaton.com
cursor buttons while in a line to toggle between the
character will appear.
ó
cursor buttons to scroll to