Eaton Memera Series Instruction Leaflet

®
EATON Memera
EAN Full Metal 2/4 Way DIN Rail Box - EAN2SEBD, EAN4SEBD
Important notes
1. This product should be installed, commissioned and maintained by or under the supervision of a
competent electrician in accordance with the current electrical engineering Codes of Practice, BS7671
(IET Wiring Regulations), Statutory requirements, and any specific instructions issued by Eaton.
2. After completing the installation and testing of this product it is essential that the user instruction leaflet is
drawn to the attention of the person responsible for its future operation and maintenance and is at all
times available for ready reference.
3. These notes assume throughout that the product is disconnected from the supply. It is essential that this
is done before any work is carried out.
4. The use to which this product is put and its place of installation is outside of Eaton´s control. Particular
care should therefore be taken to follow these instructions and to ensure their continued availability in
conjunction with the use of the product. No responsibility can be accepted by Eaton if these instructions
are disregarded.
5. Further copies of these instructions and information concerning the installation and proper use of this
product can be obtained by contacting:
Eaton Electric Limited
Grimshaw Lane
Middleton, Manchester M24 1GQ
United Kingdom
Customer Support Centre
UK tel: +44(0) 8700 545 333
UK fax: +44(0) 8700 540 333
email: ukcommorders@eaton.com
www.eaton.com
EAN2SEBD
Sealing area for
outgoing connection
of Isolator main switch
Sealing area for
incoming connection
of Isolator main switch
EAN4SEBD
1
Sealing area for
outgoing connection
of Isolator main switch
Sealing area for
incoming connection
of Isolator main switch
170443086
Version 2