4. Operation
4.4 Overview of the menus on the device
4.4.8 Program menu
142
This menu will only be available if the easyE4 is configured with its factory
settings and/or when a program created with the EDP programming lan-
guage has been stored on the easyE4 device.
You can use this menu to create a program with the EDP programming language dir-
ectly on the easyE4 device.
Table 46: Main menu
STOP ✓ RUN
PARAMETERS
SET CLOCK
CARD
INFORMATION
SYSTEM-OPT.
PROGRAM
Pressing the OK button will show the parameters for
the individual function blocks in an additional sub-
menu that can be used to modify these parameters
with the device's cursor buttons.
easyE4 10/19 MN050009 EN www.eaton.com
Opens another menu
Table 47: Program
CIRCUIT DIAGR.
FUNCTION BLOCKS
Used to display and edit the act-
ive circuit diagram, e.g.,
Table 48: Pro-
grams\Function Blocks
T 01
S
+
Ü
C 02
L:1
STOP
Table 49: Timer module
example
T 01
S
+
Ü
>I1
000
800
>I2
009
200
QV>
000
000
..