Eaton easyE4 Manual page 416

6. Function blocks
6.1 Manufacturer function blocks
412
Operators
LE - Output backlight
P device buttons
I - Bit input
Q - Bit output
Q - Bit output of a FB
2) Only on projects with ≥ 2 base devices on NET
Function block outputs
Description
(Bit)
Q1 1: if T_=1;
0: if T_=0 or E1=1 or EN=0;
RY 1: The record for the requested recipe with num-
ber NO has been loaded.
0: No recipes are loaded.
0: The value at NO has changed, but the record
for the recipe has not been loaded and is not
present at D1 through D8.
E1 Error
1: If the recipe with requested number NO
does not exist or the value range of NO is
exceeded.
0: As soon as there is a value at NO with
which the record in a valid recipe can be
addressed.
(DWord)
D1...D8 Values in the record of the recipe selected
with NO.
Assigning operands
You can assign the following operands to the function block outputs that are numeric
outputs:
Assigning operands
MB, MD, MW - Markers
NB, NW, ND - NET markers
NET stations n
QA - Analog output
I - Value input of a FB
2) Only on projects with ≥ 2 base devices on NET
You can assign the following operands to the function block outputs that are bit outputs:
Assigning operands
M - Markers
SN - Output bit via NET (send)
bit via NET (send)
easyE4 10/19 MN050009 EN www.eaton.com
Bit inputs
x
x
x
x
x
Value outputs
x
2)
x
x
x
Bit outputs
x
2)
SN - Output x
Note
Integer value range:
-2,147,483,648 to +2,147,483,647