Eaton easyE4 Manual page 116

3. Commissioning
3.6 Automatic booting from the card
112
Transfer program
Click the PC -> Card button.
The "File selection" dialog box will appear.
If the list does not show any files, this means that there are no programs on the
card.
Enter the name you want for the program into the drop-down menu, e.g., <test>.
This name can be different from the *.e70 file's name in easySoft 7. You can also
select a name from the menu.
Confirm your selection with OK. This will transfer the program for the device selec-
ted in the Project view to the card.
If the project is a NET application, the "Selection of NET station" dialog box will appear.
Select the NET station with the program that you want to transfer to the microSD
memory card, e.g., <NET station NT1>.
A plausibility check will then be run – please refer to → "Plausibility check", page 551. If
the plausibility check is completed successfully, the following prompt will appear.
easyE4 10/19 MN050009 EN www.eaton.com