Eaton easyE4 Manual page 595

The Rule setting if you want to define your own custom schedule.
Click on the Modify time zone... button to specify the time zone where you are loc-
ated.
Go to the Time zone section to select the time zone corresponding to the location where
the easyE4 device is being used.
Clicking on the Modify time zone... button will open the Time zone and geographic
coordinates dialog box.
Use the City drop-down menu to select one of the available cities.
You can click on the New button to add a new option based on geographic coordinates.
The new option will be saved on the local system.
NET-GROUP
If you are using a NET GROUP, you can select a easyE4 device from the group that will
serve as the time reference for all the other devices in the NET GROUP.
Go to the NET synchronization section and look for the checkbox for Synchronize clock
via NET.
To turn on, enable the checkbox by clicking on it.
To turn off, disable the checkbox by clicking on it.
Select the NET-ID (station number) corresponding to the device in the NET GROUP
that will serve as the time reference for the other devices.
Application
Say that only one easyE4 device in the NET group features a radio clock and that you
want this device to serve as the time reference for all the other devices in the group. In
this case, you would enter the NET-ID of the device here.
See also
Timer modules
→ "HW - 7-day time switch (Hour Week)", page 218
→ "HY - Year time switch (Hora Year)", page 228
→ "WT - Weekly timer (WeekTable)", page 268
→ "YT - Year time switch (Year Table)", page 261
→ "AC - Astronomic clock ", page 272
easyE4 10/19 MN050009 EN www.eaton.com
7. System settings
7.17 Time and Date setting
591