Eaton easyE4 Manual page 113

Setting a program as the starting program
"Do you want to enter the program as a start program on the card as well?"
If you confirm by clicking on YES, the program will be set as a starting program for
booting. Accordingly, a BOOT.TXT file that contains the name of the starting pro-
gram will be generated. In addition, the name of the starting program will appear in
the "Card setup" dialog box, in the Start program drop-down menu.
The .e70 program will be compiled into a .PRG program and shown in the list.
Optional: Checking the microSD memory card
You can use Explorer to check the contents of the microSD memory card. It should now
contain both the transferred program and the BOOT.TXT file.
Figure 62: microSD memory card drive with PROGRAM folder contains BOOT.TXT and compiled test.prg
program
The card is now prepared with all the prerequisites for booting. You can now use auto-
matic booting from the card – please refer to → "Automatic booting from the card", page
106.
easyE4 10/19 MN050009 EN www.eaton.com
3. Commissioning
3.6 Automatic booting from the card
109