Eaton easyE4 Manual page 270

6. Function blocks
6.1 Manufacturer function blocks
266
Programming view/YT01/Year time switch (new) parameters tab
Figure 144: Entry screen in the programming software
Example 4: Select time range
Year time switch YT01 should switch on on 05/01 of every year at 00:00 and remain
switched on until 11/02 of every year at 00:00.
The YT year time switch must be assigned the following parameters:
Programming view/YT01/Year time switch (new) parameters tab
Figure 145: Entry screen in the programming software
Example 5: Specific days of specific months
Year time switch YT01 should switch on on the 9th of months 6, 7, 8, 9, and 10 every
year at 00:00 and switch off on the 17th at 00:00.
The YT year time switch must be assigned the following parameters:
Programming view/YT01/Year time switch (new) parameters tab
Figure 146: Entry screen in the programming software
easyE4 10/19 MN050009 EN www.eaton.com