Eaton easyE4 Manual page 463

Working with the text display editor
In order to position a display or input element, follow the steps below:
Select the display or input element you want from the list, e.g., Static text.
While holding down the left mouse button, drag the element to the work pane and
drop it where you want it to be positioned.
Move your cursor over one of the element handles and drag the handle until the
display or input element has the size you want.
Configure the parameters using the tabs below. For example:Static text (01)
tab/Text field<Sample text>.
Figure 208: Text display editor with static text in the first line
1 List with display and input elements
2 Work pane with text display elements that have already been configured
3 Status information tab with parameters for the display and input elements
Color management in the display text editor
Each element will get its own text color and background color as parameters.
If you use the inverse display mode, the colors will be swapped.
If you enter 0 as a color, "default color" will be used.
easyE4 10/19 MN050009 EN www.eaton.com
6. Function blocks
6.1 Manufacturer function blocks
459