Eaton easyE4 Manual page 485

Figure 213: Data logger tab with set parameters for the programming view
Place a function block DL in the workspace.
Make sure that this option is enable with the check mark in the Project view/Sys-
tem settings tab/P buttons.
Establish an online connection to the device.
Save the program on the device.
Start the program with Communication view/Program/Communication/RUN
Switch the Status Display On using with Communication menu bar/ Status display
on.
On the device, press the P button P1 nine times.
The function block output RY=1 displays that logging has ended. The 9 logged data sets
are on the SD card. No other data sets are considered.
Read log files
The data logged with the DL data logger manufacturer function block is stored on the
card in a folder. The folder is named as entered in Programming view/Data logger para-
meter tab under the folder name of the log session.
The data in the recording is binary-encoded and cannot be read with standard Windows
PC tools. You can instead read it in easySoft 7, where you can view the logs on the card
and export them to Excel. To do this, click on Project menu/Card.../Data logger logs/icon
Card = PC button. In the process, the binary data of a log are converted to a *.csv
format, compiled and stored in a file. They can be read and edited in Excel.
Please keep in mind that only one folder can be created for each log ses-
sion, even if the number of files per log session is selected as greater than
1 and several binary files are also stored accordingly.
Make sure that the card is inserted in the log files.
Establish an online connection to the device with Communication view/Con-
nection/Online.
Make sure that the Status indicator is switched off using Communication menu
bar/Status display OFF.
Click on the button on the Card... in the area Program/Configuration.
easyE4 10/19 MN050009 EN www.eaton.com
6. Function blocks
6.1 Manufacturer function blocks
481