Eaton easyE4 Manual page 457

6. Function blocks
6.1 Manufacturer function blocks
Figure 204: Default colors tab for text display
These will be the default color settings used in the text display editor.
Languages tab
You can configure the text display in such a way that the device operator will be able to
change the language on the device display or on other external device displays. To do
this, you will need to configure the appropriate settings under the Languages tab.
You can assign each language any name of your choice in the Language table column.
After doing so, you will need to open the text display editor and enter the text in each lan-
guage for each text element being used.
Figure 205: Text display function block, language tab
Language selection during runtime
Allows device operators to switch language at runtime.
easyE4 10/19 MN050009 EN www.eaton.com
453