Section 3 Sd Card (Advanced); Loading The Saved Data Files - Icom IC-905 Advanced Manual

3
SD CARD (ADVANCED)

Loading the saved data files

You can load the Memory channels and transceiver's
settings from the SD card to the transceiver.
L The transceiver has "ALL" and "Select" loading options to
choose from.
TIP: Saving the current data is recommended before
loading other data into the transceiver.
(Basic manual)
1� Open the LOAD SETTING screen.
» SET > SD Card > Load Setting
2� Touch the file to load.
3� Touch "Select."
LIf you want to load all the contents on the LOAD OPTION
screen, touch "ALL" and go to step 6.
LIf you want to load only the repeater list, touch "Repeater List
Only" and go to step 6.
4� Touch the loading options.
(Example: CI-V Address)
• "✓" is displayed on the left side of the selected option.
L The Set mode settings and Memory channel contents
are always loaded.
5� Touch "<<Load>>."
6� Touch [YES] or [NO].
L When you touch [YES], the skip settings of the
repeater list are retained.
L When you touch [NO], the skip settings of the
repeater list are cleared.
7� Touch [YES].
L After the loading ends, "COMPLETED! Restart the
IC-905." is displayed.
L When you select "REF Adjust" in step 4, "The new
"REF Adjust" setting will be saved" is displayed.
8� Turn OFF the transceiver, then turn it ON again to
restart the transceiver.
3-2