Installation Guidelines; Connection Diagram; Selection Table - ABB MicroFlex e190 User Manual

Installation guidelines

• If a mains choke is also installed, the mains filter is connected between the mains
choke and the drive. See the diagram below.
• For optimal operation of the filter, the drive and the filter must be mounted on the
same conductive surface.
• Ensure the filter does not block the airflow through the drive.
• Keep the cable between the drive and the filter as short as possible.


Connection diagram

AC supply
L1 L2
L1 L2 L3
L1' L2' L3'
L1 L2 L3
~
~


Selection table

Drive type
MFE190-04xx...
-01A6-2
-03A0-2
-06A0-2
-09A0-2
The mains filters are protected to IP20.
L3 PE
Mains choke (if present)
PE
MicroFlex e190
230VAC 1Ø
Meets EN 61800-3, category C2
with motor cable <50m
OFI-02
or
OFI-01
OFI-01
Mains filter
Meets EN 61800-3, category C2
with motor cable <50m
Mains filters 167
230VAC 3Ø
OFI-03
JFI-02