Mains filters
What this chapter contains
This chapter describes how to select and install mains filters for the MicroFlex e190.
The chapter also contains the relevant technical data.
When is a mains filter required?
The EMC product standard (EN 61800-3) covers the specific EMC requirements
stated for drives (tested with motor and cable) within the EU. EMC standards such as
EN 55011 or EN 61000-6-3/4 apply to industrial and household equipment and
systems including drive components inside. Drive units complying with the
requirements of EN 61800-3 are always compliant with comparable categories in
EN 55011 and EN 61000-6-3/4, but not necessarily vice versa. EN 55011 and
EN 61000-6-3/4 do neither specify cable length nor require a motor to be connected
as a load. The emission limits are comparable according to the following table.
EN 61800-3, product
standard
1st environment,
unrestricted distribution
1st environment,
restricted distribution
2nd environment,
unrestricted distribution
2nd environment,
restricted distribution
EMC standards in general
EN 61800-3,
product standard
Category C1
Category C2
Category C3
Category C4
Mains filters 165
13
EN 55011, product family
standard for industrial,
scientific and medical (ISM)
equipment
Group 1 Class B
Group 1 Class A
Group 2 Class A
Not applicable