X3: Analog output AO0
The analog output can be used to drive loads of 1 kΩ or greater. Shielded twisted pair
cable should be used. The shield connection should be made at one end only. In
Mint, the analog output can be controlled using the DAC keyword. See the Mint help
file for full details of DAC and other related DAC... keywords.
Analog output - typical connections to a PLC/controller:
MicroFlex e190
Analog output - typical connections to an ABB AI523:
MicroFlex e190
X3
AO0
18
GND
8
Shield
10
Connect overall shield at one
end only
X3
AO0
18
GND
8
Shield
10
Connect overall shield at one
end only
Electrical installation: input / output 63
PLC/controller
AI+
AI-
AI523
I0+
2.0
I0-
1.0